- 1) Introduction
- 2) Notational Conventions and Generic Grammar
- 3) Protocol Parameters
- 4) HTTP Message
- 5) Request
- 6) Response
- 7) Entity
- 8) Connections
- 9) Method Definitions
- 10) Status Code Definitions
- 1) Informational 1xx
- 2) Successful 2xx
- 3) Redirection 3xx
- 4) Client Error 4xx
- 1) 400 Bad Request
- 2) 401 Unauthorized
- 3) 402 Payment Required
- 4) 403 Forbidden
- 5) 404 Not Found
- 6) 405 Method Not Allowed
- 7) 406 Not Acceptable
- 8) 407 Proxy Authentication Required
- 9) 408 Request Timeout
- 10) 409 Conflict
- 11) 410 Gone
- 12) 411 Length Required
- 13) 412 Precondition Failed
- 14) 413 Request Entity Too Large
- 15) 414 Request-URI Too Long
- 16) 415 Unsupported Media Type
- 17) 416 Requested Range Not Satisfiable
- 18) 417 Expectation Failed
- 5) Server Error 5xx
- 11) Access Authentication
- 12) Content Negotiation
- 13) Caching in HTTP
- 1) ..
- 2) Expiration Model
- 3) Validation Model
- 4) Response Cacheability
- 5) Constructing Responses From Caches
- 6) Caching Negotiated Responses
- 7) Shared and Non-Shared Caches
- 8) Errors or Incomplete Response Cache Behavior
- 9) Side Effects of GET and HEAD
- 10) Invalidation After Updates or Deletions
- 11) Write-Through Mandatory
- 12) Cache Replacement
- 13) History Lists
- 14) Header Field Definitions
- 1) Accept
- 2) Accept-Charset
- 3) Accept-Encoding
- 4) Accept-Language
- 5) Accept-Ranges
- 6) Age
- 7) Allow
- 8) Authorization
- 9) Cache-Control
- 10) Connection
- 11) Content-Encoding
- 12) Content-Language
- 13) Content-Length
- 14) Content-Location
- 15) Content-MD5
- 16) Content-Range
- 17) Content-Type
- 18) Date
- 19) ETag
- 20) Expect
- 21) Expires
- 22) From
- 23) Host
- 24) If-Match
- 25) If-Modified-Since
- 26) If-None-Match
- 27) If-Range
- 28) If-Unmodified-Since
- 29) Last-Modified
- 30) Location
- 31) Max-Forwards
- 32) Pragma
- 33) Proxy-Authenticate
- 34) Proxy-Authorization
- 35) Range
- 36) Referer
- 37) Retry-After
- 38) Server
- 39) TE
- 40) Trailer
- 41) Transfer-Encoding
- 42) Upgrade
- 43) User-Agent
- 44) Vary
- 45) Via
- 46) Warning
- 47) WWW-Authenticate
- 15) Security Considerations
- 16) Acknowledgments
- 17) References
- 18) Authors' Addresses
- 19) Appendices
- 20) Index
- 21) Full Copyright Statement
- 22) Acknowledgement
10.3 Redirection 3xx
This class of status code indicates that further action needs to be taken by the user agent in order to fulfill the request. The action required MAY be carried out by the user agent without interaction with the user if and only if the method used in the second request is GET or HEAD. A client SHOULD detect infinite redirection loops, since such loops generate network traffic for each redirection.
Note: previous versions of this specification recommended a maximum of five redirections. Content developers should be aware that there might be clients that implement such a fixed limitation.
10.3.1 300 Multiple Choices
The requested resource corresponds to any one of a set of representations, each with its own specific location, and agent- driven negotiation information (Section 12) is being provided so that the user (or user agent) can select a preferred representation and redirect its request to that location.
Unless it was a HEAD request, the response SHOULD include an entity containing a list of resource characteristics and location(s) from which the user or user agent can choose the one most appropriate. The entity format is specified by the media type given in the Content- Type header field. Depending upon the format and the capabilities of RFC 2616 HTTP/1.1 June 1999 the user agent, selection of the most appropriate choice MAY be performed automatically. However, this specification does not define any standard for such automatic selection.
If the server has a preferred choice of representation, it SHOULD include the specific URI for that representation in the Location field; user agents MAY use the Location field value for automatic redirection. This response is cacheable unless indicated otherwise.
10.3.2 301 Moved Permanently
The requested resource has been assigned a new permanent URI and any future references to this resource SHOULD use one of the returned URIs. Clients with link editing capabilities ought to automatically re-link references to the Request-URI to one or more of the new references returned by the server, where possible. This response is cacheable unless indicated otherwise.
The new permanent URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s).
If the 301 status code is received in response to a request other than GET or HEAD, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued.
Note: When automatically redirecting a POST request after receiving a 301 status code, some existing HTTP/1.0 user agents will erroneously change it into a GET request.
10.3.3 302 Found
The requested resource resides temporarily under a different URI. Since the redirection might be altered on occasion, the client SHOULD continue to use the Request-URI for future requests. This response is only cacheable if indicated by a Cache-Control or Expires header field.
The temporary URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s).
If the 302 status code is received in response to a request other than GET or HEAD, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued.
Note: RFC 1945 and RFC 2068 specify that the client is not allowed to change the method on the redirected request. However, most existing user agent implementations treat 302 as if it were a 303 response, performing a GET on the Location field-value regardless of the original request method. The status codes 303 and 307 have been added for servers that wish to make unambiguously clear which kind of reaction is expected of the client.
10.3.4 303 See Other
The response to the request can be found under a different URI and SHOULD be retrieved using a GET method on that resource. This method exists primarily to allow the output of a POST-activated script to redirect the user agent to a selected resource. The new URI is not a substitute reference for the originally requested resource. The 303 response MUST NOT be cached, but the response to the second (redirected) request might be cacheable.
The different URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s).
Note: Many pre-HTTP/1.1 user agents do not understand the 303 status. When interoperability with such clients is a concern, the 302 status code may be used instead, since most user agents react to a 302 response as described here for 303.
10.3.5 304 Not Modified
If the client has performed a conditional GET request and access is allowed, but the document has not been modified, the server SHOULD respond with this status code. The 304 response MUST NOT contain a message-body, and thus is always terminated by the first empty line after the header fields.
The response MUST include the following header fields:
- Date, unless its omission is required by Section 14.18.1 If a clockless origin server obeys these rules, and proxies and clients add their own Date to any response received without one (as already specified by [RFC 2068], Section 14.19), caches will operate correctly.
- ETag and/or Content-Location, if the header would have been sent in a 200 response to the same request.
- Expires, Cache-Control, and/or Vary, if the field-value might differ from that sent in any previous response for the same variant.
If the conditional GET used a strong cache validator (see Section 13.3.3), the response SHOULD NOT include other entity-headers. Otherwise (i.e., the conditional GET used a weak validator), the response MUST NOT include other entity-headers; this prevents inconsistencies between cached entity-bodies and updated headers.
If a 304 response indicates an entity not currently cached, then the cache MUST disregard the response and repeat the request without the conditional.
If a cache uses a received 304 response to update a cache entry, the cache MUST update the entry to reflect any new field values given in the response.
10.3.6 305 Use Proxy
The requested resource MUST be accessed through the proxy given by the Location field. The Location field gives the URI of the proxy. The recipient is expected to repeat this single request via the proxy. 305 responses MUST only be generated by origin servers.
Note: RFC 2068 was not clear that 305 was intended to redirect a single request, and to be generated by origin servers only. Not observing these limitations has significant security consequences.
10.3.7 306 (Unused)
The 306 status code was used in a previous version of the specification, is no longer used, and the code is reserved.
10.3.8 307 Temporary Redirect
The requested resource resides temporarily under a different URI. Since the redirection MAY be altered on occasion, the client SHOULD continue to use the Request-URI for future requests. This response is only cacheable if indicated by a Cache-Control or Expires header field.
The temporary URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s) , since many pre-HTTP/1.1 user agents do not understand the 307 status. Therefore, the note SHOULD contain the information necessary for a user to repeat the original request on the new URI.
If the 307 status code is received in response to a request other than GET or HEAD, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued.